UPGRADE YOUR PLASTIC TAP TO STAINLESS STEEL!

This is a safe, sanitary and durable Stainless Steel Beverage Tap designed for wine, water and other beverages.
* Beverage Dispensers
* Wine Barrels
* Countertop Gravity Water Purifiers such as the Stefani Water Purifier.

This is not a kitchen or bathroom faucet!
It's a tap for water purifiers, jugs and dispensers.

FEATURES:
* 90-degree turn stainless ball valve
* Bibcock Single Faucet
* Size: 16mm (screw diameter)
* Thread Pitch: 1.25MM

FITS OPENING 12/25inch or 1.2cm opening to install.
* Material: Food Grade 304 Stainless Steel
* Colour: Chrome

Needs 5/8 inch or 16mm diameter opening to install
Fits dispenser wall up to 11/16 inch or 17mm thick
Material: Stainless steel

Instructions

1. Wash with soap and water before use, and in between uses.
1. Install the stainless steel faceplate.
2. Push the O ring washer over the stem of the tap.
3. Push the stem through the wall of the dispenser.
4. Push the second O ring washer over the stem of the tap.
5. Install the second stainless steel faceplate.
6. Fasten by screwing on the stainless steel nut firmly.

ABOUT TIGHTENING
Do not over-tighten. If necessary, use a 3/4 inch wrench for the screw nut. Leakage can be caused by not tightening enough, but also by tightening too much! Don't leave out any parts. There must be a faceplate over the silicone O Ring on both the inside and the outside of the dispenser wall.

MAINTENANCE NOTES:
* Wash before use.
* Clean thoroughly after each use.
* Keep in open position for storage.
* If the tap drips in the closed position, soak in vinegar and wash to remove mineral deposits that can build up.

Quantity: 1 Set

Package includes:
1 x Stainless Steel Drink Dispenser Spigot/Faucet
2 x Stainless Steel Gasket Face Plates
2 x Silicone O Ring Washers
1 x Stainless Steel Screw Nut